网址 : www.ashongsheng.com
辽宁钢纤维产物掺入通俗混凝土中,具备优良的抗拉、抗剪、抗压、抗折、抗裂、防震、防渗、防爆等机能,施工造价与平凡混凝土根基持平,Liaoning steel fiber products mixed into popular concrete have excellent functions of tension, shear, compression, flexure, crack resistance, shock resistance, seepage control and explosion protection. The construction cost is the same as that of ordinary concrete foundation. 使用年限能增至几十年以上,维修次数少,有显着的社会和经济效益。钢纤维厂家搅拌车装料容量应控制车容量的85%。The service life can be increased to more than several decades, with fewer maintenance times, which has significant social and economic benefits. The loading capacity of steel fiber mixer should be controlled at 85% of the vehicle capacity.投料时宜先按施工配合比将骨料及钢纤维投入搅拌车中,逼迫搅拌2一3min,让辽宁钢纤维厂家与骨料充实搀合,然后参加水搅拌3一5min,并查抄钢纤维是否搅拌均匀。When feeding, aggregate and steel fibers should be put into mixing truck according to construction mix proportion, forced to mix for 2-3 minutes, so that steel fibers and aggregate can be enriched and mixed, and then participate in water mixing for 3-15 minutes, and check whether the steel fibers are evenly stirred.若有钢纤维粘结在一路的征象,应继承搅拌直至钢纤维彻底疏散成单根为止。搅拌钢纤维硅最佳接纳程度双轴型强制式搅拌机。If there are signs of steel fibers bonding together, stirring should be inherited until the steel fibers are completely evacuated into a single root. The optimum acceptance of stirred steel fibre silicon is a biaxial forced mixer. 纤维硅搅拌罐车在运送到施工现场,应加快滚动2一3min后利用,并查抄有没有结团征象。When the fibre silicon mixing tank truck is transported to the construction site, it should speed up rolling for 2-3 minutes before using, and check whether there is any sign of agglomeration.
辽宁钢纤维厂家混凝土的压实抹平必需在砼初凝前竣事,概况收光要实时举行,最佳是在浇注完混凝土后举行,收光后的混凝土外貌不要暴露钢纤维。The compaction and plastering of concrete from Liaoning Steel Fiber Factory must be completed before the initial setting of concrete. The general situation of lighting should be held in real time. The best time is after pouring concrete. The appearance of concrete after lighting should not expose steel fibers. 对付密筋梁的产物,应选用小直径振捣棒,而对付钢筋非常麋集的地方,要利用钢筋棍,可以更为密实。Small diameter vibrating rods should be used to deal with the products of dense reinforced beams. Where steel bars are very abundant, they can be more compact.